Skip to content
Sai Traders & Engineering Works

Primary & biological treatment

Effluent Treatment Plant

Screening, equalisation, chemical and biological treatment that brings raw process effluent down to a load the rest of the plant can handle.

Our ETP process begins with screening to remove debris, followed by collection and equalisation to balance flow. The effluent then undergoes pH correction, coagulation and flocculation, and primary and secondary treatment, and finishes with clarification, tertiary filtration and safe sludge handling.

An effluent treatment plant is the first and the largest part of the train, and the part that decides how well everything downstream behaves. We size it against your actual effluent — flow through the day, COD and BOD load, colour, total dissolved solids — rather than against a nameplate figure.

We take the plant from the process drawing through fabrication, erection and commissioning, and we stay on site through the stabilisation period until the outlet parameters hold steady against the consent conditions you have to meet.

An effluent treatment plant with tanks and a circular clarifier

Our scope

  • Design & engineering
  • Fabrication & supply
  • Installation & commissioning
  • Operation & maintenance
An aeration tank running the activated sludge process

Typically supplied

  • Bar screen and oil & grease trap
  • Equalisation tank with coarse bubble aeration
  • Flash mixer and flocculator
  • Primary clarifier
  • Aeration tank — conventional, MBBR or MBR
  • Secondary clarifier and sludge sump
  • Pressure sand and activated carbon filters
  • Sludge dewatering — filter press or screw press

Where it is used

  • Textile dyeing and bleaching
  • Tannery
  • Food processing
  • Pharmaceutical

For drawings, sizing or a quotation on effluent treatment plant, write to arun.saitradersengg@gmail.com or call +91 97509 55595.